High molecular polymer polyacrylamide Flocculant PAM FOR Oil drilling for oil exploitation

    • application of polyacrylamide (pam) used in oil field

      Application of Polyacrylamide (PAM) used in oil field

      In the logarithmic relationship, that is the linear relationship; the size of PAM molecular weight has a great impact on its viscosity, high molecular weight and ultra high molecular weight (more than 20 million) PAM has a very high viscosity; PAM aqueous solution has a good tolerance for electrolytes Sex; PAM molecular chain is very long, which makes it bridge between two particles, accelerate the sedimentation of particles…

    • partially hydrolyzed polyacrylamide(flocculant) used in

      Partially hydrolyzed polyacrylamide(flocculant) used in

      It should not be toxic, corrosive or flammable, but inert to contaminants. The partially hydrolyzed PHPA is a polymer of high molecular weight anionic synthetic that is designed to inhibit clays to hydrate prone, leading to instability of the hole.

    • polyacrylamide in oilfield - sinofloc chemical

      Polyacrylamide in Oilfield - Sinofloc Chemical

      Polyacrylamide (PAM) is not only a high-performance flocculants, but also because of the high viscosity of aqueous solution, but also a very good thickener. Due to its thickening, flocculation and regulation of rheological properties it can be used as a drilling fluid, fracturing fluid, and polymer flooding in the exploitation of oil extraction.

    • application of polyacrylamide in oil exploitation -henan

      Application of polyacrylamide in oil exploitation -Henan

      Application of polyacrylamide in oil exploitation 19/04/09  Application of polyacrylamide in oil exploitation. Polyacrylamide (PAM) can widely use in more area,such as papermaking dispersant, incense making ,oil industry etc.. Here we will make a introduction about pam using in oil industry.

    • phpa polymer|phpa anionic polyacrylamide(a2718) for oil

      PHPA Polymer|PHPA anionic polyacrylamide(A2718) for oil

      PHPA Polymer|PHPA anionic polyacrylamide(A2718) for oil drilling: White or yellow powder,non-toxic,non-corrosive,easily solubale in water,mainly used as a selective flocculant for non-dispersed,low solid phase water-based drilling fluid.it can help to reduce water losses,improve drilling fluid rheological properities and reduce the friction resistance as well.

    • phpa anionic polyacrylamide with high molecular weight

      PHPA anionic polyacrylamide with high molecular weight

      PHPA anionic polyacrylamide with high molecular weight used for Drilling Mud: In oil exploitation, polyacrylamide is mainly used for drilling mud as well as Enhanced Oil Recovery, etc., which is widely used in drilling, completion, cementing,fracturing, enhanced oil recovery and other mining operations in the oil field.

    • polyacrylamide high molecular weight oil additives for

      Polyacrylamide High Molecular Weight Oil Additives For

      Polyacrylamide High Molecular Weight Oil Additives For Drilling Fluid , Find Complete Details about Polyacrylamide High Molecular Weight Oil Additives For Drilling Fluid,Polyacrylamide High Molecular Weight Oil Additives For Drilling Fluid,Polyacrylamide Coagulant Pam,Best Price Of Polyacrylamide from Electronics Chemicals Supplier or Manufacturer-Zouping Changshan Town Zefeng Fertilizer

    • polyacrylamide in oilfield - sinofloc chemical

      Polyacrylamide in Oilfield - Sinofloc Chemical

      Polyacrylamide (PAM) is not only a high-performance flocculants, but also because of the high viscosity of aqueous solution, but also a very good thickener. Due to its thickening, flocculation and regulation of rheological properties it can be used as a drilling fluid, fracturing fluid, and polymer flooding in the exploitation of oil extraction.

    • phpa anionic polyacrylamide with high molecular weight

      PHPA anionic polyacrylamide with high molecular weight

      PHPA anionic polyacrylamide with high molecular weight used for Drilling Mud: In oil exploitation, polyacrylamide is mainly used for drilling mud as well as Enhanced Oil Recovery, etc., which is widely used in drilling, completion, cementing,fracturing, enhanced

    • application of polyacrylamide in oil exploitation -henan

      Application of polyacrylamide in oil exploitation -Henan

      When the molecular weight of the polymer is high, it is recommended to use a slightly thinner (eg 0.1%). In this case, B. Polyacrylamide solution into the sewage, such as due to equipment scattered state is not very good, the proposed distribution of a little thinner.

    • oil &gas exploitation chemicals – youju chemical

      Oil &Gas Exploitation Chemicals – Youju chemical

      PAMs Have Been Widely Applied In Oil Drilling Industry Enhance oil recovery (tertiary oil recovery): this requires the high molecular weight PAM with high viscosity . Ordinary product can resist a temperature up to 75℃ and a salinity up to 20,000 ppm.

    • polyacrylamide polymer flocculant - buy polyacrylamide

      Polyacrylamide Polymer Flocculant - Buy polyacrylamide

      As a lubricant, suspension agent, clay stabilizer, oil displacement agent, water loss reducer and thickener, polyacrylamide is widely used in drilling, acidizing, fracturing, water plugging, cementing, secondary oil recovery and tertiary oil recovery, is an extremely important oilfield chemical.

    • polyacrylamide high molecular weight oil additives for

      Polyacrylamide High Molecular Weight Oil Additives For

      Polyacrylamide High Molecular Weight Oil Additives For Drilling Fluid , Find Complete Details about Polyacrylamide High Molecular Weight Oil Additives For Drilling Fluid,Polyacrylamide High Molecular Weight Oil Additives For Drilling Fluid,Polyacrylamide Coagulant Pam,Best Price Of Polyacrylamide from Electronics Chemicals Supplier or Manufacturer-Zouping Changshan Town Zefeng Fertilizer Factory

    • polyacrylamide degradation and its implications in

      Polyacrylamide degradation and its implications in

      High molecular weight (106–3 × 107 Da) polyacrylamide (PAM) is commonly used as a flocculant in water and wastewater treatment, as a soil conditioner, and as a viscosity modifier and friction

    • china polyacrylamide suppliers and factory

      China Polyacrylamide Suppliers and Factory

      Polyacrylamide Price, PAM, Water Treatment manufacturer / supplier in China, offering High Molecular Polymer Polyacrylamide/Cationic PAM for Wastewater Treatments, 4mm Coal and Wood Activated Carbon for Desulfurization, Top Grade Production, High Quality Activated Alumina...

    • china polyacrylamide suppliers and factory

      China Polyacrylamide Suppliers and Factory

      Welcome to consult polyacrylamide price with Shandong Tongli Chemical Co.,Ltd, which is one of the leading polyacrylamide suppliers in China and also a productive PAM, PHPA, polyelectrolyte, polyelectrolite, flocculant, polymer, SAP factory. - Page 2

    • polyacrylamide used as thickener for drilling fluid

      Polyacrylamide Used as Thickener for Drilling Fluid

      Polyacrylamide Used as Thickener for Drilling Fluid. Thickeners are used in oil field exploitation, and they also have the effect of inhibiting shale hydration and loss reduction. Therefore, the use of thickeners can not only improve the rheology of the drilling fluid, but also have the anti-sloughing effect of

    • polymer anionic flocculant polyacrylamide msds, view

      polymer anionic flocculant polyacrylamide msds, View

      Cationic polyacrylamide powder msds. copolymerized by cationic monomer and acrylamide. It is a water-soluble and linear organic polymer with high molecular weight. Application. As flocculating agent, mainly used in industrial solid-liquid separation process, including settlement, clarification, concentrate and sludge dewatering processes.

    • polyacrylamide | 9003-05-8

      Polyacrylamide | 9003-05-8

      High polymer. Polyacrylamide has effects of flocculation, thickening, drag reduction, adhesive, colloidal stabilizing, filming and preventing scale. It is widely used in papermaking, mining, coal washing, metallurgy, oil exploitation and other industrial sectors and is also a

    • anionic / cationic polyacrylamide water treatment phpa

      Anionic / Cationic Polyacrylamide Water Treatment PHPA

      Anionic / Cationic Polyacrylamide Water Treatment PHPA High Viscosity Cationic PAM. How To Use Polyacrylamide? CPAM should be diluted to the concentration of 0.1%(based on solid content).It is better to use neutral or desalted water.When making up solution, the product should be scattered evenly in the stirring water, usually the temperature is between 50-60°C. The most economical dosage is based on

    • anionic flocculant(phpa polyacrylamide)for oil drilling

      Anionic flocculant(PHPA polyacrylamide)for oil drilling

      3. Application. In oil exploitation, flocculant is mainly used for drilling mud as well as Enhanced Oil Recovery, etc., which is widely used in drilling, completion, cementing,fracturing, enhanced oil recovery and other mining operations in the oil field.

    • polyacrylamide used as thickener for drilling fluid

      Polyacrylamide Used as Thickener for Drilling Fluid

      Polyacrylamide Used as Thickener for Drilling Fluid. Thickeners are used in oil field exploitation, and they also have the effect of inhibiting shale hydration and loss reduction. Therefore, the use of thickeners can not only improve the rheology of the drilling fluid, but also have the anti-sloughing effect of

    • polyacrylamide | 9003-05-8

      Polyacrylamide | 9003-05-8

      High polymer. Polyacrylamide has effects of flocculation, thickening, drag reduction, adhesive, colloidal stabilizing, filming and preventing scale. It is widely used in papermaking, mining, coal washing, metallurgy, oil exploitation and other industrial sectors and is also a

    • anionic / cationic polyacrylamide water treatment phpa

      Anionic / Cationic Polyacrylamide Water Treatment PHPA

      Anionic / Cationic Polyacrylamide Water Treatment PHPA High Viscosity Cationic PAM. How To Use Polyacrylamide? CPAM should be diluted to the concentration of 0.1%(based on solid content).It is better to use neutral or desalted water.When making up solution, the product should be scattered evenly in the stirring water, usually the temperature is between 50-60°C. The most economical dosage is based on

    • anionic polyacrylamide phpa pam, anionic polyacrylamide

      anionic polyacrylamide phpa pam, anionic polyacrylamide

      Our core products are inorganic coagulants and organic flocculants for the treatment of water and polymer, PHPA/Polyacrylamide for oil/gas drilling and EOR (enhanced oil recovery).

    • blufloc a6518 anionic polyacrylamide high molecular weight

      Blufloc A6518 Anionic Polyacrylamide High Molecular Weight

      Blufloc A6518 Anionic Polyacrylamide High Molecular Weight Mining and Drilling Flocculant . Product Description: Blufloc AA6518 offers a broad spectrum of products ensuring maximum performance and cost efficiency in mining and drilling applications.

    • best price anionic polyacrylamide pam for oil drilling

      Best Price Anionic Polyacrylamide Pam For Oil Drilling

      Best Price Anionic Polyacrylamide Pam For Oil Drilling Fluid/ White Powder , Find Complete Details about Best Price Anionic Polyacrylamide Pam For Oil Drilling Fluid/ White Powder,Flocculant Polyacrylamide,Oil Drilling Chemical Polyacrylamide,Linear Polyacrylamide from Petroleum Additives Supplier or Manufacturer-Henan Xinxiang No. 7 Chemical Co., Ltd.

    • polymer anionic flocculant polyacrylamide msds, view

      polymer anionic flocculant polyacrylamide msds, View

      polymer anionic flocculant polyacrylamide msds . Polyacrylamide is, simply called PAM, a water- soluble high polymer and widely used in petroleum, paper-making, metallurgical, textile, chemical and environment protection fields. There are three categories of anionic, cationic and non-ionic type. Application introduction

    • synthetic polymeric flocculants aid dewatering | waterworld

      Synthetic Polymeric Flocculants Aid Dewatering | WaterWorld

      Most flocculants in use today are synthetic water soluble polymers based on acrylamide and its derivatives and which may include either anionic or cationic groups in a wide range of molecular weights and charge densities. They are supplied as dry powders or in liquid form as liquid dispersions up to 50 percent active, emulsions up to 40 percent and in some cases as low concentration solutions.

    • polymer flocculants - tramfloc, inc.

      Polymer Flocculants - Tramfloc, Inc.

      FLOCCULANTS: POLYMER FEEDING AND CONTROL SYSTEMS. A successful Tramfloc polymer program requires the proper equipment to efficiently make down and feed the polymer. The feed equipment selected for a specific application depends on the polymer type, form, molecular weight, and feed rate of the polymer solution.

    • temperature tolerant and salt resistant polyacrylamide

      Temperature Tolerant and Salt Resistant Polyacrylamide

      In oil field exploration and development and exploration of geology, water and coal, it is used as adhesive of well drilling mud raw materials, can improve the service life of drill bits, improve the drill speed and drilling footage, and reduce plug in replacing drill, and has prominent well slough preventing effect, and it can be used as fracturing fluid of oil fields or plugging agent of controlling profile and plugging water.

    • high quality pam polymer water treatment, view pam polymer

      High Quality PAM polymer Water Treatment, View PAM polymer

      Polyacrylamide is simply called PAM, a water- soluble high flocculant polymer and widely used in petroleum, paper-making, metallurgical, textile,sugar refing and environment protection fields. There are three categories of Anionic, Cationic and Non-ionic type.

    • anionic polyacrylamide phpa manufacturers & suppliers

      Anionic Polyacrylamide Phpa manufacturers & suppliers

      China Anionic Polyacrylamide Phpa manufacturers

    • china flocculant, flocculant manufacturers, suppliers

      China Flocculant, Flocculant Manufacturers, Suppliers

      China Flocculant manufacturers

    • anionic flocculant(phpa polyacrylamide)for oil drilling

      Anionic flocculant(PHPA polyacrylamide)for oil drilling

      White or yellow powder,non-toxic,non-corrosive,easily solubale in water,mainly used as a selective flocculant for non-dispersed,low solid phase water-based drilling fluid.it can help to reduce water losses,improve drilling fluid rheological properities and reduce the friction resistance as well.

    • oil field chemicals - drilling fluids manufacturer from

      Oil Field Chemicals - Drilling Fluids Manufacturer from

      Partially hydrolyzed polyacrylamide or PHPA in short serves as a polymer for drilling mud additives. It is a high molecular weight polymer that helps in controlling the fluid loss and increases viscosity and reduces friction. It can be used as a flocculant, dispersant, lubricant, blocking agent, well drilling mud raw material or fluid loss

    • synthesis and characterization of high molecular weight

      Synthesis and Characterization of High Molecular Weight

      High molecular weight polyacrylamide (PAM) nanoparticle dispersions are products with wide application possibilities, the most important of which is in petroleum industry such as drilling fluid

    • flocculant msds cationic polyacrylamide

      flocculant msds cationic polyacrylamide

      High Quality Cation Polyacrylamide for Waste Water Treatment and oil field Characteristics : Cation Polyacrylamide is copolymerized on cation monomer and polyacrylamide is one kind of high molecular Weight of liner polymer. Its functions include decolor, adsorption, cloud-removing and binding.

    • flocculant anionic polyacrylamide polymer for soil

      Flocculant Anionic Polyacrylamide Polymer For Soil

      Our core products are inorganic coagulants and organic flocculants for the treatment of water and polymer, PHPA/Polyacrylamide for oil/gas drilling and EOR (enhanced oil recovery). We also supply PAC and CMC for drilling application. We built our own plants for our products to supply competitive products to our customers in all over the world.

    • blufloc a6518 anionic polyacrylamide high molecular weight

      Blufloc A6518 Anionic Polyacrylamide High Molecular Weight

      Blufloc A6518 Anionic Polyacrylamide High Molecular Weight Mining and Drilling Flocculant . Product Description: Blufloc AA6518 offers a broad spectrum of products ensuring maximum performance and cost efficiency in mining and drilling applications.

    • polymer flocculants - tramfloc, inc.

      Polymer Flocculants - Tramfloc, Inc.

      Flocculants are used in solids thickening, sludge dewatering, and as coagulation aids. FLOCCULANTS: LIQUID SOLUTION COAGULANTS. Coagulants are produced in solution form in concentrations ranging from 5-50%. Molecular weight, viscosity, and solution solubility are all characteristics that determine a product’s concentration.

    • high quality pam polymer water treatment, view pam polymer

      High Quality PAM polymer Water Treatment, View PAM polymer

      Polyacrylamide is simply called PAM, a water- soluble high flocculant polymer and widely used in petroleum, paper-making, metallurgical, textile,sugar refing and environment protection fields. There are three categories of Anionic, Cationic and Non-ionic type.

    • synthetic polymeric flocculants aid dewatering | waterworld

      Synthetic Polymeric Flocculants Aid Dewatering | WaterWorld

      This is because the flocs formed with high molecular weight products are relatively large, trapping water within the structure and increasing the final moisture content of the filter cake. Most synthetic flocculants are based on polyacrylamide and its derivatives.

    • cationic polyacrylamide sludge dewatering manufacturer

      Cationic Polyacrylamide Sludge Dewatering Manufacturer

      Blufloc Polyacrylamide (PAM) / Polyelectrolyte is water soluble polymer with Anionic, Cationic and Nonionic types. The range of molecular weight is different, Anionic is from 5-22 million, Cationic is from 5-12 million and Nonionic is from 5-12 million, with a charge density ranging from 0-60%.

    • anionic polyacrylamide : manufacturers, suppliers

      Anionic Polyacrylamide : Manufacturers, Suppliers

      Polyacrylamide application Anionic polyacrylamide 1, mainly used as a flocculant: for suspended particles, coarse, high concentration, particle with positive charge, water pH is neutral or alkaline water, due to the anionic polyacrylamide molecular chain containing a certain amount of polar groups to adsorption of solid particles suspended in the water, etc. 2, used in petroleum industry, oil production,

    • anionic polyacrylamide manufacturers and suppliers | oubo

      Anionic Polyacrylamide manufacturers and suppliers | Oubo

      Anionic Polyacrylamide is water-soluble polymers which is insoluble in most organic solvents, It presents high polymer electrolyte characteristics in neutral and alkaline mediums. With good flocculation, it can reduce the frictional resistance between the liquid and be widely used in mining industries and water treatment etc.

    • flocculant anionic polyacrylamide powder for oil drilling

      Flocculant Anionic Polyacrylamide Powder For Oil Drilling

      Quality Flocculant Anionic Polyacrylamide Powder For Oil Drilling - find quality polyacrylamide, Chemical Auxiliary Agent & polyacrylamide from Zhengzhou Wade Water Treatment Material Co., Ltd. of China Suppliers - 140778424.

    • flocculant - polyacrylamide (pam) - aquaenjoy

      Flocculant - Polyacrylamide (PAM) - Aquaenjoy

      Polyacrylamide is widely used in the mineral processing industry, especially in the process of sedimentation and separation. Our flocculants products range offers the high molecular weight and high charge to satisfy the clients' need. Enhanced Oil Recovery Chemicals; Profile control and water shutoff, Drilling mud, Tertiary oil recovery (EOR).

    • polyacrylamide pam flocculant 12 million mw for oil drilling

      Polyacrylamide PAM Flocculant 12 Million MW for Oil Drilling

      Polyacrylamide PAM flocculant 12 million MW for oil drilling Polyacrylamide is a kind of linear polymers,it can soluble in water,insoluble in most organic solvents.it has good flocculation and also can reduce the friction resistance between liquid.

    • commercial eor polymers factory supply phpa polyacrylamide

      commercial eor polymers factory supply phpa polyacrylamide

      Our core products are inorganic coagulants and organic flocculants for the treatment of water and polymer, PHPA/Polyacrylamide for oil/gas drilling and EOR (enhanced oil recovery). We also supply PAC and CMC for drilling application. We built our own plants for our products to supply competitive products to our customers in all over the world.

    • polyacrylamide (pam) as flocculant cas 9003-05-8

      Polyacrylamide (PAM) as Flocculant CAS 9003-05-8

      The leading Polyacrylamide (PAM) as Flocculant CAS 9003-05-8 manufacturers and suppliers in China, offers Polyacrylamide (PAM) Nonionic Anionic Cationic CAS 9003-05-8 with competitive price here. Welcome to contact our factory for details.

    • polyacrylamide cas#: 9003-05-8

      Polyacrylamide CAS#: 9003-05-8

      In oil exploitation, it is mainly used as oil displacement agent, water blocking agent, profile control agent, thickener, drag-reducing agent, water treatment agent. Physical properties: Solubility in water: upon rapid mechanical stirring, polyacrylamide is easily soluble in cold water form a transparent adhesive solution. Increasing the temperature does not affect its solubility and only affects its dissolution when the

    • polyacrylamide polymer china manufacturers & suppliers

      Polyacrylamide Polymer China Manufacturers & Suppliers

      High Polymer Emulsifier; Wet Strength Agent; Dry Strength Agent; Fixing Agent; Curing Agent; AKD Special Starch; Paper Sizing Agent; Dispersant N; Zirconium Oxychloride; Defoamer (defoaming Agent) Styrene Acrylic Copolymer; Calcium Chloride

    • flocculant anionic polyacrylamide powder for oil drilling

      Flocculant Anionic Polyacrylamide Powder For Oil Drilling

      Noionic Polyacrylamide is a kind of soluble high molecular weight polymer or polyelectrolyte. Having several polar groups in the molecular chain, it can form bridge among particals by absorbing suspended solid particals in wastewater and condense particle into big flocs by neutralizing charges.

    • polyacrylamide polymer china manufacturers & suppliers

      Polyacrylamide Polymer China Manufacturers & Suppliers

      Specifications anionic polyacrylamide 1 Appearance white granule or powder 2 Solid Content more than90 3 Cationic degree 20 80 High high molecular polymer anionic polyacrylamide powder for . more>>

    • cationic polyacrylamide manufacturers and suppliers | oubo

      Cationic polyacrylamide manufacturers and suppliers | Oubo

      Cationic Polyacrylamide is a white granule and it is a linear high molecular compound which is soluble in water. It is non-toxic and odorless, easily absorbs moisture, is insoluble in ethanol, acetone and other organic solvents, has positive charge active groups on molecular chains, and

    • anionic polyacrylamide : manufacturers, suppliers

      Anionic Polyacrylamide : Manufacturers, Suppliers

      Polyacrylamide application Anionic polyacrylamide 1, mainly used as a flocculant: for suspended particles, coarse, high concentration, particle with positive charge, water pH is neutral or alkaline water, due to the anionic polyacrylamide molecular chain containing a certain amount of polar groups to adsorption of solid particles suspended in

    • anionic polyacrylamide by wuxi easyclean chemicals co

      Anionic Polyacrylamide by Wuxi Easyclean Chemicals Co

      Easyfloc Anionic Polyacrylamide, it is anionic flocculant, polymer, also said anionic polyelectrolyte, it is high-molecular polymer and has such properties as flocculability, thickening, shear, resistance diminishing, and dispersion.

    • partially hydrolyzed oil drilling fluid cationic

      partially hydrolyzed oil drilling fluid cationic

      Polyacrylamide is, simply called PAM, a water- soluble high flocculant polymer and widely used in petroleum, paper-making, metallurgical, thickener agent in textile printing and coating,sugar refing and environment protection fields.

    • high molecular cationic polyacrylamide pam flocculant for

      High Molecular Cationic Polyacrylamide PAM Flocculant for

      Flocculant, Cationic Polyacrylamide, PAM Flocculant manufacturer / supplier in China, offering High Molecular Cationic Polyacrylamide PAM Flocculant for Paper Mill, Solid Polydadmac Powder for Water Treatment Coagulant (poly diallyl dimethyl ammonium chloride), Aerobic Tank Bacteria for Wastewater Treatment and so on.

    • more than you really want to know - polymers for water and

      More Than You Really Want To Know - Polymers for Water and

      Provides more than you really want to know about polymers, water chemicals and equipment for potable, waste and process water in industrial, municipal and mining treatment systems. Over 500 formulations are available plus custom blending. Tramfloc manufactures flocculants, coagulants, water soluble polymers, emulsion breakers, dewatering agents, tailings and concentrate treatment.