Water treatment Polyacrylamide cationic Polyacrylamide anionic polyacrylamide in wastewater treatment

    • anionic polyacrylamide chemicals flocculant water treatment

      Anionic Polyacrylamide Chemicals Flocculant Water Treatment

      Most effective for wastewater treatment of iron and steel plant, electroplate factory, metallurgy and coal washing etc. 4) Drinking water treatment Many water from the water plants in China comes from the river water, which contains large sum of sediment and mineral, very turbid, even after precipitation and filtration it still can not meet the requirements, therefore the flocculant is needed.

    • anionic polyacrylamide - wastewater treatment chemicals

      Anionic polyacrylamide - wastewater treatment chemicals

      Anionic polyacrylamide is the kind of wastewater treatment chemicals which is water-soluble linear polymer synthesized with high degree of polymerization. Anionic polyacrylamide powder is easily soluble in water and almost insoluble in common organic solvents such as benzene, ether, lipids and acetone.

    • polyacrylamide pam on sales - water-treatmentchemical

      Polyacrylamide Pam on sales - water-treatmentchemical

      Cationic Polyacrylamide PAM / Pam Water Treatment for papermaking water Contact Now Cationic Polyacrylamide PAM / Pam Water Treatment for papermaking water Specification Product Name Cation Polyacrylamide /Cation PAM/CPAM Item Cationic type Appearance white fine-sand shaped powder or colorless ...

    • wastewater used anionic polyacrylamide|industrial|municipal

      Wastewater Used Anionic Polyacrylamide|Industrial|Municipal

      Anionic Polyacrylamide, White Granular is a water-soluble high polymer solid powder. It’s not soluble in most organic solvent, with good flocculating activity. It’s not soluble in most organic solvent, with good flocculating activity.

    • polyacrylamide for water treatment - sinofloc chemical

      Polyacrylamide for Water Treatment - Sinofloc Chemical

      Polyacrylamide for Water Treatment Sinofloc series polyacrylamide is used in wastewater treatment with anion and cationic type, which can be used in flocculation precipitation and sewage treatment. Generally speaking, the higher the ion degree is, the more compact the sludge formation will be.

    • cationic polyacrylamide(pam) for water treatment

      Cationic polyacrylamide(PAM) for water treatment

      Cationic polyacrylamide, is a white powder water -soluble polymer which is copolymerized by cationic monomer and acrylamide. It has the function of decolorizing, adsorbing, turbid eliminating and bonding. It generate a good flocculation and can decrease the resistance between liquids.

    • polyacrylamide in water treatment - sinofloc

      Polyacrylamide in Water Treatment - Sinofloc

      Polyacrylamide in Water Treatment. According to the sludge contains the main components of different sludge can be divided into organic sludge and inorganic sludge. In general, cationic polyacrylamide for the treatment of organic sludge, anionic polyacrylamide for the treatment of inorganic sludge, alkaline is very easy to use cationic...

    • polyacrylamide(pam) water treatment agent | xunyu group

      Polyacrylamide(PAM) water treatment agent | XUNYU GROUP

      Anionic PAM: It is widely used in waste water treatment of chemical industry, municipal sewage treatment, such as coal washing, mineral processing, metallurgy, iron and steel industry and electronic industry. It is also used in oil industry to enhance oil recovery which is widely used.

    • pam polyacrylamide and its application in water treatment

      PAM polyacrylamide and its application in water treatment

      The polyacrylamide (PAM) has a very important role in the field of water treatment. In our country is very poor water resources area, average annual water resources total 2.8 trillion cubic meters, ranking sixth in the world, but the amount per capita only 271 cubic meters, equivalent to the world average amount per capita quarter, ranking No. 88 in the world.

    • (pdf) polyacrylamide for wastewater treatment

      (PDF) Polyacrylamide for wastewater treatment

      Polyacrylamide and its co-polymers are used as flocculants or coagulants in industrial wastewater treatment .Homo-polymer is used in this application and can be either nonionic, cationic or ...

    • wastewater used anionic polyacrylamide|industrial|municipal

      Wastewater Used Anionic Polyacrylamide|Industrial|Municipal

      Anionic Polyacrylamide, White Granular is a water-soluble high polymer solid powder. It’s not soluble in most organic solvent, with good flocculating activity. It’s not soluble in most organic solvent, with good flocculating activity.

    • water treatment chemicals - polyacrylamide manufacturer from

      Water Treatment Chemicals - Polyacrylamide Manufacturer from

      AvansChem Anionic polyacrylamide (APAM) is the most important raw material in high molecular weight polyacrylamide water treatment chemicals. Our APAM with anionic charge density ranging from 0-100% that are class leading in applications such as raw water clarification, fermentation by-product recovery, sugar juice clarification and process water recycling, as a soil conditioner etc..

    • polyacrylamide(pam) water treatment agent | xunyu group

      Polyacrylamide(PAM) water treatment agent | XUNYU GROUP

      Anionic PAM: It is widely used in waste water treatment of chemical industry, municipal sewage treatment, such as coal washing, mineral processing, metallurgy, iron and steel industry and electronic industry. It is also used in oil industry to enhance oil recovery which is widely used.

    • anionic polyacrylamide(pam) for water treatment

      Anionic polyacrylamide(PAM) for water treatment

      Anionic polyacrylamide, is a white powder water -soluble polymer with varying molecular weight and charge density. It generate a good flocculation and can decrease the resistance between liquids. It is most often used to increase the viscosity of water (creating a thicker solution) or to encourage flocculation of particles present in water and ...

    • cationic polyacrylamide flocculant for pulp and paper sludge

      Cationic Polyacrylamide Flocculant for Pulp and Paper Sludge

      Cationic Polyacrylamide Flocculant Used in Pulp and Paper Sludge Dewatering Treatment Description: Blufloc C8030 is high molecular weight cationic polyacrylamide, used for different kinds of sludge dewatering, works in belt filter, screw filter and centrifugar filter.

    • anionic /cationic/ nonionic emulsion polyacrylamide for water

      Anionic /Cationic/ Nonionic Emulsion Polyacrylamide for Water

      Used as water treatment chemical, for municipal sewage, papermaking, dyeing, coal washing, mill run and other industrial wastewater treatment. High-viscosity, fast- reaction. broad applicalion. convenient to use.

    • anionic / cationic polyacrylamide water treatment phpa high

      Anionic / Cationic Polyacrylamide Water Treatment PHPA High

      Anionic / Cationic Polyacrylamide Water Treatment PHPA High Viscosity Cationic PAM. How To Use Polyacrylamide? CPAM should be diluted to the concentration of 0.1%(based on solid content).It is better to use neutral or desalted water.When making up solution, the product should be scattered evenly in the stirring water, usually the temperature is between 50-60°C. The most economical dosage is based on the trial.

    • water treatment chemical flocculant nonionic anionic cationic

      Water Treatment Chemical Flocculant Nonionic Anionic Cationic

      Water Treatment Chemical Flocculant Nonionic Anionic Cationic Polyacrylamide , Water Treatment Chemical Flocculant Nonionic Anionic Cationic Polyacrylamide,Polyacrylamide,Cationic Polyacrylamide,Anionic Polyacrylamide from Electronics Chemicals Supplier or Manufacturer-Gongyi Filter Industry Co., Ltd.

    • synthesis and application of anionic polyacrylamide in water

      Synthesis and Application of Anionic Polyacrylamide in Water

      What's more, the authors discussed the application status of anionic polyacrylamide in water treatment. Based on these reviews, future research perspectives relating to its synthesis and ...

    • anionic polyacrylamide water treatment polymer - alibaba

      anionic polyacrylamide water treatment polymer - alibaba

      Anionic Polyacrylamide [Features ] Anionic Polyacrylamide series are high polymerized and high water-soluble linear high molecular polymer, soluble in water and insoluble in general organic solvents such as benzene, aether, acetone etc.

    • wastewater used cationic polyacrylamide|industrial|municipal

      Wastewater Used Cationic Polyacrylamide|Industrial|Municipal

      White Granular Cationic Polyacrylamide CPAM can be widely used at Waste Water Treatment(Primary Clarification, Secondary & Tertiary Treatment, Dissolved Air Floatation) White CPAM also can be used at Sludge Thickening & Sludge Dewatering

    • how to choose anionic, cationic polyacrylamide?

      How to choose anionic, cationic polyacrylamide?

      Polyacrylamide is divided into anionic, cationic, nonionic and zwitterionic according to its ionic properties. 2, to determine the molecular weight. After determining the type of polyacrylamide water purifier, we have to determine the molecular weight of the polyacrylamide water purifier used in the treatment of the effluent by analyzing the ...

    • products | polyacrylamide, flocculant, water treatment

      Products | polyacrylamide, flocculant, water treatment

      Our factory specializes in supplying Cationic Polyacrylamide, Anionic Polyacrylamide and Nonionic Polyacrylamide for treatment of industrial waste water and urban sewage. Qingdao Oubo Chemical has advanced equipment and professional staff, which ensure all the products and service to be in good order.

    • anionic polyacrylamide(pam) for water treatment

      Anionic polyacrylamide(PAM) for water treatment

      Anionic polyacrylamide, is a white powder water -soluble polymer with varying molecular weight and charge density. It generate a good flocculation and can decrease the resistance between liquids. It is most often used to increase the viscosity of water (creating a thicker solution) or to encourage flocculation of particles present in water and allow rapid settlement of finely suspended solid.

    • anion cation polyacrylamide flocculant for waste water

      Anion Cation Polyacrylamide Flocculant For Waste Water

      Anionic PAM wastewater treatment: especially for suspended particles, sewage, wastewater, metallurgical wastewater, coal washing wastewater, etc. Treatment, the effect is good. The type of cationic polyacrylamide ion degree should be selected according to the dehydration type in the sludge dehydration, and the filter press is suitable for the ...

    • china municipal wasterwater polyacrylamide suppliers

      China Municipal Wasterwater Polyacrylamide Suppliers

      Understand the source, nature, composition (such as organic matter/inorganic matter ratio /PH value, etc.) and solid content of the sludge from users.In general, cationic polyacrylamide flocculant is used to treat organic sludge, while anionic polyacrylamide flocculant is used to treat inorganic sludge, cationic polyacrylamide flocculant should not be used when alkalinity is strong, and anionic polyacrylamide flocculant should not be used when acidity is strong.Sludge with high solid content ...

    • cationic cpam polyacrylamide in water treatment

      Cationic CPAM polyacrylamide in water treatment

      Cationic polyacrylamide CPAM [ CPAM Properties ] Cationic polyacrylamide CPAM is the water-soluble high polymer or gathers the electrolyte. Because in its molecular chain includes the certain amount polar group,cationic PAM can through the absorbed water in the aerosol solids, causes between the granule the bridging or neutral causes the granule condensation through the electric charge to form big flocculation.

    • the use of cationic polymers as primary coagulants in water

      The Use of Cationic Polymers as Primary Coagulants in Water

      In applying organic polymers to the removal of UV absorbing compounds (used as a measure of trihalomethane precursors), a reservoir water was best treated with a high MW polydiallyldimethy-lammonium chloride (poly DADMAC). Similar results were obtained for a river water, where a cationic polyacrylamide (CPAM) of high charge was also effective.

    • polyacrylamide market for water treatment, oil & gas, paper

      Polyacrylamide Market for Water Treatment, Oil & Gas, Paper

      Polyacrylamide is commercially available in variants such as cationic, anionic, non-ionic, and others (including homopolymers and copolymers). Polyacrylamide is used to coagulate or flocculate ...

    • polyacrylamide (non-ionic, cationic, anionic, and others

      Polyacrylamide (Non-ionic, Cationic, Anionic, and Others

      The polyacrylamide market is segmented based on product types as non-ionic, cationic, anionic and others; based on end-use as water treatment, petroleum, paper making and others; and based on ...