ULTRA HIGH MOLECULAR WEIGHT ANIONIC PAM POLYACRYLAMIDE POWDER in wastewater treatment

    • polyacrylamide, pam, anionic polyacrylamide

      Polyacrylamide, PAM, anionic polyacrylamide

      Synonyms: PAM CAS No: 9003-05-8 MF: (C3H5NO)n Molecular Weight: 71.07 HS Code:39069010 Appearance:White granule 【Application】 1). As flocculants these products are applied to the paste with positive particle surface.

    • polyacrylamide(pam) water treatment agent | xunyu group

      Polyacrylamide(PAM) water treatment agent | XUNYU GROUP

      Polyacrylamide(PAM), often referred to as “polymer” or “flocculant”. It is a long chain, linear organic polymer made up of individual monomer units with the molecular formula of C3H5NO and molecular weights ranging from 3,000,000 to 30,000,000 Daltons. PAM is a dry white or light yellow powder similar in shape to table salt.

    • anionic polymer flocculant & polyacrylamide powder | sinofloc

      Anionic Polymer Flocculant & Polyacrylamide Powder | Sinofloc

      Our anionic polymer flocculants is amorphous, free-flowing powder, with Molecular Weight: 5 to 25 million. What Kinds of Polyacrylamide are Available in Sinofloc? Sionfloc polyacrylamide is available in solid, emulsion and liquid status.

    • pam polyacrylamide and its application in water treatment

      PAM polyacrylamide and its application in water treatment

      For example: a steel mills that dust sewage flocculation clarification, the original use of anion of 20% ~ 30% PAM, the consumption of high reached 2.5 g / m3 of sewage, the use degree of anion PAM consumption only 0.2 g / m3. PAM the higher molecular weight Danhao generally lower. PAM can be used for treatment of water in thermal power plant.

    • ultra high molecular weight anionic pam polyacrylamide powder

      Ultra High Molecular Weight Anionic Pam Polyacrylamide Powder

      ultra high molecular weight anionic pam polyacrylamide powder for eor Polyacrylamide, abbr. PAM, is a kind of water soluble polymer, has unique effect to increase the viscosity of water or to promote the flocculation of particles present in water, it can also reduce the frictional resistance between the liquid.

    • wastewater used anionic polyacrylamide|industrial|municipal

      Wastewater Used Anionic Polyacrylamide|Industrial|Municipal

      Anionic Polyacrylamide, White Granular is a water-soluble high polymer solid powder. It’s not soluble in most organic solvent, with good flocculating activity. It’s not soluble in most organic solvent, with good flocculating activity.

    • high molecular weight anionic polyacrylamide - 13% charge

      High Molecular Weight Anionic Polyacrylamide - 13% Charge

      Accepta 4212 is a high performance; high molecular weight anionic polyacrylamide scientifically formulated for use in industrial and process wastewater and effluent treatment applications. Accepta 4212 has a mole charge of 13%.

    • anionic / cationic polyacrylamide water treatment phpa high

      Anionic / Cationic Polyacrylamide Water Treatment PHPA High

      Anionic / Cationic Polyacrylamide Water Treatment PHPA High Viscosity Cationic PAM. How To Use Polyacrylamide? CPAM should be diluted to the concentration of 0.1%(based on solid content).It is better to use neutral or desalted water.When making up solution, the product should be scattered evenly in the stirring water, usually the temperature is between 50-60°C. The most economical dosage is based on the trial.

    • acrylamide manufacturer, polyacrylamide supplier, flocculant

      Acrylamide manufacturer, Polyacrylamide supplier, Flocculant

      Magnafloc 919 is a an ultra high molecular weight anionic polyacrylamide as a free flowing granular powder widely used for 1.coal tailing clarification 2.copper tailing clarification 3.iron ore tailing clarification 4.gold cyanidation ...

    • ultra high molecular weight polyacrylamide, ultra

      Ultra High Molecular Weight Polyacrylamide, Ultra

      About 8% of these are paper chemicals, 6% are water treatment chemicals, and 5% are petroleum additives. A wide variety of ultra high molecular weight polyacrylamide options are available to you, such as petroleum additives, coating auxiliary agents, and paper chemicals.

    • anionic polyacrylamide - polyacrylamide/phpa - yixing bluwat

      Anionic Polyacrylamide - Polyacrylamide/PHPA - YIXING BLUWAT

      Blufloc Anionic Polyacrylamide, is solid powder water-soluble polymer with varying molecular weight and charge density. It is most often used to increase the viscosity of water (creating a thicker solution) or to encourage flocculation of particles present in water and allow rapid settlement of finely suspended solids.

    • polyacrylamide powder manufacturer, pam water treatment chemicals

      Polyacrylamide Powder Manufacturer, PAM Water Treatment Chemicals

      Water treatment plants; Agricultural fields; Oil refining industry ; Chemical industry; Other details: PAM 90% min; PAM, Anionic Polyacrylamide; white granule; Molecular weight: 5 - 25million; Monomer free: 0.05% max; Polyacrylamide, also known as PAM, is an extremely water-soluble high polymer. It finds use in Paper Making, Chemical, Petroleum, Textile, Metallurgical and environment protection fields.

    • anionic polyacrylamide powder - manufacturer,supplier & exporter

      Anionic Polyacrylamide Powder - Manufacturer,Supplier & Exporter

      Anionic Polyacrylamide of Blufloc Series is accessible in solid powder form and this water soluble polymer has various molecular weight and different charge density range. This item is utilized for raising viscosity level of water by enhancing its thickness level or to promote flocculation of particles found in water by raising settlement rate ...

    • application of anionic polyacrylamide-henan yuanbo

      Application of anionic polyacrylamide-Henan Yuanbo

      Anionic polyacrylamide is an ultra-high molecular weight polymer copolymerized by acrylamide and acrylate. It has a molecular weight of 18 million or more. It has strong adsorption and bridging efficiency. It can be used according to different uses and users' requirements for product performance.

    • application of polyacrylamide (pam) used in oil field

      Application of Polyacrylamide (PAM) used in oil field

      In the logarithmic relationship, that is the linear relationship; the size of PAM molecular weight has a great impact on its viscosity, high molecular weight and ultra high molecular weight (more than 20 million) PAM has a very high viscosity; PAM aqueous solution has a good tolerance for electrolytes Sex; PAM molecular chain is very long, which makes it bridge between two particles, accelerate the sedimentation of particles, is a good flocculant; acrylamide monomer is a toxic substance ...

    • erosion & sediment control technical bulletin #2 application

      Erosion & Sediment Control Technical Bulletin #2 APPLICATION

      q Ultra high molecular weight of 6 to 24 mg/mole (preferably 12-15 mg/mole) q Water-soluble, “linear,” or “non-crosslinked” q Highest grade Anionic PAM (potable drinking water grad – PDWG), certified for compliance with ANSI/NSF Standard 60 and EPA and FDA residual acrylamide monomer (AMD) limits of 0.05% for drinking water/food

    • nonionic polyacrylamide flocculant - sinoloc supplier

      Nonionic Polyacrylamide Flocculant - Sinoloc Supplier

      The application of nonionic polyacrylamide in building materials has been widely promoted owing to its role of flocculation, water holding, thickening, adhesion and lubrication. In addition, non-ionic polyacrylamide in other building materials, because of its ultra-high viscosity and its special molecular structure, has good water retention effect.

    • anionic polyacrylamide,anionic polyacrylamide manufacturer

      anionic polyacrylamide,anionic polyacrylamide manufacturer

      Magnafloc 919 is a an ultra high molecular weight anionic polyacrylamide as a free flowing granular powder widely used for 1.coal tailing clarification 2.copper tailing clarification 3.iron ore tailing clarification 4.gold cyanidation ...

    • anionic polyacrylamide phpa pam

      anionic polyacrylamide phpa pam

      anionic polyacrylamide phpa pam, Wholesale Various High Quality anionic polyacrylamide phpa pam Products from Global Sodium Tripolyphosphate Suppliers and anionic polyacrylamide phpa pam Factory,Importer,Exporter at Okchem.

    • high molecular weight polyacrylamide list - high molecular

      high molecular weight polyacrylamide list - high molecular

      high molecular weight polyacrylamide for sale - 1815 - high molecular weight polyacrylamide wholesalers & high molecular weight polyacrylamide manufacturers from China manufacturers.

    • anionic polyacrylamide - water treatment chemical - yixing

      Anionic Polyacrylamide - Water Treatment Chemical - YIXING

      Blufloc Anionic Polyacrylamide, is solid powder water-soluble polymer with varying molecular weight and charge density. It is most often used to increase the viscosity of water (creating a thicker solution) or to encourage flocculation of particles present in water and allow rapid settlement of finely suspended solids.

    • polyacrylamide, pam, anionic polyacrylamide

      Polyacrylamide, PAM, anionic polyacrylamide

      Such as: metallurgy, mine, coal, aluminium, paper, water in power plant , river gravel and other wastewater treatment. Also it is applicable to the city sewage treatment. It is often used along with inorganic flocculants. 2). The ultra-high molecular weight polyacrylamide is mainly used in EOR exploitation. 3).

    • ultra-high molecular weight polyacrylamide - dirgaga

      Ultra-high Molecular Weight Polyacrylamide - Dirgaga

      Ultra-high molecular weight polyacrylamide produced 15 million -2500 10000 polyacrylamide, used mainly for oilfield three mining flooding, According to different use of the hydrolysis into before and after two hydrolysis process, It indicators of the quality of ordinary anionic polyacrylamide is more stringent, production DCS control management, in 2002 through the ISO9001 quality system ...

    • nonionic polyacrylamide flocculant - sinoloc supplier

      Nonionic Polyacrylamide Flocculant - Sinoloc Supplier

      Our nonionic polymer flocculants is amorphous, free-flowing powder, with Molecular Weight: 5 to 15 million. What Kinds of Nonionic Polyacrylamide are Available in Sinofloc? Sionfloc nonionic polyacrylamide is available in solid status.

    • high molecular weight polyacrylamide list - high molecular

      high molecular weight polyacrylamide list - high molecular

      high molecular weight polyacrylamide for sale - 1815 - high molecular weight polyacrylamide wholesalers & high molecular weight polyacrylamide manufacturers from China manufacturers.

    • china polyacrylamide anionic (pam) for water treatment

      China Polyacrylamide Anionic (PAM) for Water Treatment

      Polyacrylamide Anionic (PAM) for Water Treatment. Polyacrylamide Anionic, Face Brick manufacturer / supplier in China, offering Polyacrylamide Anionic (PAM) for Water Treatment, Virgin PS /GPPS/ HIPS Granules with Excellent Quality, Virgin HDPE/ High Density Polyethylene Granules for Injection Moulding and so on.

    • a novel acrylamide-free flocculant and its application for

      A novel acrylamide-free flocculant and its application for

      From technical point of view, a reliable control on monomer residue is more challenging than high molecular weight build-up in industrial manufacturing, especially for the powder type products. Since acrylamide has a relatively high boiling point of 125 °C/25 mmHg, it is not feasible to remove the monomer either by reduced vacuum or solvent washing.

    • china anionic polyacrylamide suppliers & manufacturers

      China Anionic Polyacrylamide Suppliers & Manufacturers

      An anionic polyacrylamide ( APAM ) is a water - soluble high molecular polymer , which is mainly used for flocculation and sedimentation of various industrial waste water , and is mainly used for sewage treatment , sludge dewatering and the like of various industrial waste water , such as waste water in iron and steel plant , waste water in ...

    • characterization of the adsorption of high molecular weight

      Characterization of the adsorption of high molecular weight

      High molecular weight, anionic, non-ionic and cationic polyacrylamide are used extensively in the oil industry in applications such as drilling, water shut-off, and enhanced oil recovery. They are also used as flocculants in water treatment processes.

    • characterization of kaolin flocs formed by polyacrylamide as

      Characterization of kaolin flocs formed by polyacrylamide as

      Characterization of kaolin flocs formed by polyacrylamide as flocculation aids ... The results showed that floc size induced by anionic PAM with medium molecular weight (A130) and ultra high ...