Drilling Fluid Anionic Polymer, Drilling Fluid ... - alibaba
About 85% of these are petroleum additives, 37% are water treatment chemicals, and 28% are paper chemicals. A wide variety of drilling fluid anionic polymer options are available to you, such as water treatment chemicals, paper chemicals, and coating auxiliary agents.
Polyacrylamide Eor, Polyacrylamide Eor Suppliers
The use of this flocculant ensures high clarity of the treated water, remarkable increase of the sedimentation rate as well as the possibility to operate over a wide PH range. Our core products are inorganic coagulants and organic flocculants for the treatment of water and polymer, Polyacrylamide for oil/gas drilling and enhanced oil recovery.
Anionic Polyacrylamide Chemicals Flocculant Water Treatment
Anionic Polyacrylamide Chemicals Flocculant Water Treatment Polymer. 1. Product characteristics. Anionic polyacrylamide (APAM) series products are water-soluble linear polymers synthesized under high degree polymerization, easily soluble in water, almost insoluble in the benzene, the ether, the aliphatics, the acetone and other common organic solvents.
High Molecular Weight Anionic Polymer Flocculant – 2047
High Molecular Weight Anionic Polymer Flocculant. It is scientifically formulated for use as a flocculant in effluent and wastewater treatment applications. Accepta 2047 is designed to flocculate suspended solids and is particularly useful for non-potable raw water clarification, primary and secondary effluent clarification, oily waste water clarification and filtration.
Flocculant (Anionic Polymer) DAF | DUBI CHEM
Flocculant (Anionic Polymer) DAF. This product is use flocclant for dissolved air flotation, and sludge dewatering of inorganic sludges. This RXSOL specified product is used to flocculate suspended oil particles in oilfield waters either by adding it directly to alkaline systems, or in the case of lower pH systems,...
Anionic Flocculant, Dry Zetag Magnafloc Polymer, BASF
Coagulants / Flocculants, Chemicals pt#1025DRYFLOC, Anionic Flocculant How It Works. Polyelectrolytes are water soluble polymer carrying ionic charge along the polymer chain. Depending upon the charge, these polymers are anionic or cationic. Polyelectrolytes are available in a wide range of molecular weights and charge densities.
TP226 Overview of the effects of residual flocculants on
Page 2 TP ˜ Overview of the Effects of Residual Flocculants on Aquatic Receiving Environments assessment of environmental risks. It comments that polyelectrolytes are reported in the literature to have a very low mammalian toxicity and are generally considered to be innocuous materials (PACIA 1998).
Stormwater Best Management Practice: Polymer Flocculation
covered with polymer flocculant powder to clarify the water before it’s discharged. The turbidity of water coming from the drilling rig was over 5,000 NTU. But after the settling pit and polymer flocculation in the mixing ditch and dispersion field, the discharged water’s turbidity was reduced to 2 NTU.
Polymer Flocculants - Tramfloc, Inc.
Emulsion products provide the most concentrated liquid flocculant with polymer concentrations of 25-70%. Liquid emulsion flocculants are available in cationic, nonionic, and anionic charges. In neat form, liquid emulsion flocculants range from to 200 to 1000 cp at 70° F and have complete freeze-thaw stability.
Anionic Polyacrylamide Flocculant|APAM Powder Suppliers
Now the anionic polyacrylamide is used as flocculant, its adding quantity is only 1/50 of inorganic flocculant, and its effect is several times better than the inorganic flocculant. For some rivers with serious pollution due to organic matter,anionic polyacrylamide is well recommended that the inorganic flocculant is used together with the ...