easy to dissolve anionic polyacrylamide for oil exploitation

    • tramfloc, inc. - more than you really want to know about polymers

      TRAMFLOC, INC. - More Than You Really Want To Know About Polymers

      2.1- HOW TO DISSOLVE POLYACRYLAMIDE FLOCCULANTS. Flocculant solutions are highly viscous and it is difficult to prepare highly concentrated solutions. Flocculant solutions tend to degrade after a while. In the laboratory, 0.5 % is the recommended concentration of stock solution which is then stable for two weeks. A 0.1 % solution is stable for six days.

    • polyacrylamide emulsion - sinofloc chemical

      Polyacrylamide Emulsion - Sinofloc Chemical

      Polyacrylamide Emulsion. But the water-in-water emulsion is very easy to dissolve, and also the synthesis process is more advanced. Dissolve the emulsion with water to use high-speed shear when the way, so that the emulsion of polyacrylamide hydrogel in full contact with water and quickly dispersed in water.

    • polyacrylamide | 9003-05-8

      Polyacrylamide | 9003-05-8

      In oil exploitation, it is mainly used as oil displacement agent, water blocking agent, profile control agent, thickener, drag-reducing agent, water treatment agent. Physical properties Solubility in water: upon rapid mechanical stirring, polyacrylamide is easily soluble in cold water form a transparent adhesive solution. Increasing the temperature does not affect its solubility and only affects its dissolution when the concentration is increased to a high viscosity.

    • the ultimate buyer's guide- polyacrylamide - polyacrylamide

      The Ultimate Buyer's Guide- Polyacrylamide - Polyacrylamide

      is used to treat organic sludge, while anionic polyacrylamide is used to treat inorganic sludge. It is not easy to use cationic polyacrylamide when alkalinity is strong, but it is not suitable to use anionic polyacrylamide when acidity is strong. When solid content of sludge is high, the amount of polyacrylamide is usually larger.

    • china anionic polyacrylamide suppliers and manufacturers

      China Anionic Polyacrylamide Suppliers and Manufacturers

      Anionic polyacrylamide (APAM) is water-soluble polymer, water soluble is strong, can make water and water insoluble gel, can introduce all kinds of ionic groups and adjust the molecular weight to obtain specific performance, to a lot of solid surface and dissolve material has the good adhesion force, and therefore is widely applied in ...

    • china polyacrylamide manufacturers and suppliers

      China Polyacrylamide Manufacturers and Suppliers

      WanFeng is one of the leading China polyacrylamide manufacturers and suppliers certified by ISO9001, ISO14001, OHS18001 etc. Please rest assured to import polyacrylamide at competitive price here with us.

    • anionic polyacrylamide by yixing bluwat chemicals co., ltd

      Anionic Polyacrylamide by Yixing Bluwat Chemicals Co., Ltd

      Anionic polyacrylamide Polyacrylamide is, simply called PAM, a water- soluble high polymer and widely used in petroleum, paper-making, metallurgical, textile, chemical and environment protection fields. There are three categories of anionic, cationic and non-ionic type.

    • anionic polyacrylamide : manufacturers, suppliers

      Anionic Polyacrylamide : Manufacturers, Suppliers

      anionic polyacrylamide Product features anionic polyacrylamide series product is easily soluble in water and nearly insoluble in benzene, diethyl ether and acetone. It is widely used in oil extraction, mineral separation, coal washing, metallurgy, chemical, paper making, textile, sugar making, medical, construction material and agricultural industry.

    • what is polyacrylamide|pam faq

      What is Polyacrylamide|PAM FAQ

      Unlike sugar or salt which dissolve fairly quickly in water, granular polyacrylamide needs to be agitated thoroughly in order for it to dissolve. Polyacrylamide blocks (or cubes) are usually placed in wire baskets that need to be secured to the edge of the ditch to avoid washing of the blocks down the ditch.

    • anionic polyacrylamide price, wholesale & suppliers

      Anionic Polyacrylamide Price, Wholesale & Suppliers

      A wide variety of anionic polyacrylamide price options are available to you, such as coating auxiliary agents, paper chemicals, and water treatment chemicals. You can also choose from free samples, paid samples. There are 2,159 anionic polyacrylamide price suppliers, mainly located in Asia.

    • how to solve the dissolution problem of polyacrylamide

      How to solve the dissolution problem of polyacrylamide

      2, stirring too fast. Polyacrylamide dissolution rate is also affected by the viscosity and the stirring speed, the same molecular weight polyacrylamide, the faster the stirring speed, the shorter the dissolution rate, the viscosity, the worse. This is because the dissolution, both polyacrylamide amide form intramolecular hydrogen bonds,...

    • polyacrylamide used in oil field - cellulose ether

      Polyacrylamide used in Oil Field - Cellulose Ether

      Anionic Polyacrylamide 20-21 Medium Powder 18-19 High Powder/ emulsion 5-15 Medium Powder/ emulsion Functions: •Easy dissolve, canpreparation on site, save time, •Strong sand-carrying ability, sand ratio can reach to 199%, •Low friction resistance, make the formation fracture easy to open, •Low residue, can dilute with water at any

    • china anionic polyacrylamide suppliers and manufacturers

      China Anionic Polyacrylamide Suppliers and Manufacturers

      Anionic polyacrylamide (APAM) is water-soluble polymer, water soluble is strong, can make water and water insoluble gel, can introduce all kinds of ionic groups and adjust the molecular weight to obtain specific performance, to a lot of solid surface and dissolve material has the good adhesion force, and therefore is widely applied in thickening, flocculation and stable colloid, drag reduction, bond, film forming, scale inhibitor, gel and biomedical materials and so on.It is mainly used for ...

    • sinofloc polyacrylamide emulsion application in slick water

      Sinofloc Polyacrylamide Emulsion Application in Slick Water

      Sinofloc Polyacrylamide Emulsion Application in Slick Water Polyacrylamide emulsion is a new polymer material made of acrylamide through special process polymerization since 1960s. The polyacrylamide emulsion is by a polymerization reaction in which a water-soluble monomer (acrylamide) is dissolved in an aqueous phase and dispersed in a non-polar liquid by means of an emulsifier to form a water-in-oil type emulsion.

    • textile dyeing anticreasing agent/ softening and crease

      Textile Dyeing Anticreasing Agent/ Softening and Crease

      Textile dyeing anticreasing agent/ Softening and Crease-resistant Agent Nonionic Polyacrylamide [Introduction]: Textile dyeing anticreasing agent is easily formed can be used for any wrinkles, wrinkles, scars chicken seal and rub wet fabric finishing agents, especially suitable for processing under difficult conditions, such as low bath ratio or heavy-duty winch and jet dyeing machines, and machining heavy, easy to fold the fabric.

    • nonionic polyacrylamide – youju chemical -polyacrylamide

      Nonionic Polyacrylamide – Youju chemical -Polyacrylamide

      Nonionic polyacrylamide is a high polymer with high molecular weight and low ion exponent ,which has function of flocculation ,dispersal ,thickening , bonding , film forming , gelation and colloidal stability . it’s flocculation has little influence by pH value and salt , and in the process of acid waste water treatment,it’s effect is superior to anionic polymer .

    • anionic polyacrylamide by liaocheng yongxing environmental

      Anionic Polyacrylamide by Liaocheng Yongxing Environmental

      Anionic polyacrylamide Polyacrylamide is, simply called PAM, a water- soluble high polymer and widely used in petroleum, paper-making, metallurgical, textile, chemical and environment protection fields. There are three categories of anionic, cationic and non-ionic type.

    • polyacrylamide cas#: 9003-05-8 - chemicalbook

      Polyacrylamide CAS#: 9003-05-8 - chemicalbook

      In oil exploitation, it is mainly used as oil displacement agent, water blocking agent, profile control agent, thickener, drag-reducing agent, water treatment agent. Physical properties: Solubility in water: upon rapid mechanical stirring, polyacrylamide is easily soluble in cold water form a transparent adhesive solution. Increasing the temperature does not affect its solubility and only affects its dissolution when the concentration is increased to a high viscosity.

    • white emulsion liquid anionic polyacrylamide for oilfield

      White Emulsion Liquid Anionic Polyacrylamide For Oilfield

      Can be used in both industrial and oil/gas drilling. Can be used in both fresh water and brines but requires high temperature. Can be used as Oil-displacing agent of oil field tertiary oil recovery. Applicable in : shale stabilization, viscosities, friction reduction, fluid loss control and lubrication.

    • china polyacrylamide manufacturers and suppliers

      China Polyacrylamide Manufacturers and Suppliers

      WanFeng is one of the leading China polyacrylamide manufacturers and suppliers certified by ISO9001, ISO14001, OHS18001 etc. Please rest assured to import polyacrylamide at competitive price here with us.

    • how to solve the dissolution problem of polyacrylamide

      How to solve the dissolution problem of polyacrylamide

      Polyacrylamide dissolution rate is influenced by water temperature, dissolved polyacrylamide time, usually 30 degrees Celsius warm water more appropriate, the higher the temperature, the lower the viscosity of the resulting solution, the high temperature will overcome the hydrogen bond association -CONH2 so that more of the amide group and water molecules association, which resulted in low polyacrylamide solution viscosity.

    • polyacrylamide used in oil field - cellulose ether

      Polyacrylamide used in Oil Field - Cellulose Ether

      Anionic Polyacrylamide 20-21 Medium Powder 18-19 High Powder/ emulsion 5-15 Medium Powder/ emulsion Functions: •Easy dissolve, canpreparation on site, save time, •Strong sand-carrying ability, sand ratio can reach to 199%, •Low friction resistance, make the formation fracture easy to open, •Low residue, can dilute with water at any

    • sinofloc polyacrylamide emulsion application in slick water

      Sinofloc Polyacrylamide Emulsion Application in Slick Water

      Sinofloc Polyacrylamide Emulsion Application in Slick Water Polyacrylamide emulsion is a new polymer material made of acrylamide through special process polymerization since 1960s. The polyacrylamide emulsion is by a polymerization reaction in which a water-soluble monomer (acrylamide) is dissolved in an aqueous phase and dispersed in a non ...

    • nonionic polyacrylamide,nonionic polyacrylamide exporters

      Nonionic Polyacrylamide,Nonionic Polyacrylamide Exporters

      Nonionic Polyacrylamide is white solid powder, non-toxic in nature, insoluble in almost all organic solvents and easy to dissolve in water. We are one of the eminent Importers, Exporters and Suppliers of Nonionic Polyacrylamide from Maharashtra, India.

    • anionic/cationic/nonionic polyacrylamide powder/granule

      Anionic/Cationic/Nonionic Polyacrylamide Powder/Granule

      Welcome to consult anionic/cationic/nonionic polyacrylamide powder/granule price with Shandong Tongli Chemical Co.,Ltd, which is one of the leading anionic/cationic/nonionic polyacrylamide powder/granule suppliers in China and also a productive anionic/cationic/nonionic polyacrylamide powder/granule factory.

    • china anionic polyacrylamide emulsion for aluminium oxide

      China Anionic Polyacrylamide Emulsion for Aluminium Oxide

      Dissolution of anionic polyacrylamide emulsion: Dissolved water: Low hardness of water with PH as neutral is recommended to use; Groundwater and water dissolving inorganic substance or excessive metal ions is easy to reduce product performance.

    • low price anionic & cationic polyacrylamide emulsion for

      Low Price Anionic & Cationic Polyacrylamide Emulsion for

      Welcome to consult low price anionic & cationic polyacrylamide emulsion for drilling and fracturing price with Shandong Tongli Chemical Co.,Ltd, which is one of the leading low price anionic & cationic polyacrylamide emulsion for drilling and fracturing suppliers in China and also a productive low price anionic & cationic polyacrylamide emulsion for drilling and fracturing factory.

    • preparation of organic polymers - snf.au

      PREPARATION OF ORGANIC POLYMERS - snf.au

      Acrylamide + Chloromethylated monomer Cationic polyacrylamide Note : with R = H : ADAM (dimethylaminoethyl acrylate) with R = CH 3 : MADAM (dimethylaminoethyl methacrylate) CATIONIC POLYACRYLAMIDES Copolymers of acrylamide and of a chloromethylated monomer 1.1.3. Use and dosage : Coagulants are used after dilution.

    • reduced adsorption of polyacrylamide-based fracturing fluid

      Reduced adsorption of polyacrylamide-based fracturing fluid

      Polyacrylamide‐based fracturing fluid is commonly used in shale fracturing. Polyacrylamide (PAM) becomes adsorbed in the shale micro‐fractures, decreasing the permeability of the reservoir.

    • anionic polymers list - anionic polymers for sale

      anionic polymers list - anionic polymers for sale

      anionic polymers for sale - 3827 - anionic polymers wholesalers & anionic polymers manufacturers from China manufacturers.