Anionic polyacrylamide can increase the viscosity of oil in middle east marketing

    • polyacrylamide degradation and its implications

      Polyacrylamide degradation and its implications

      High MW anionic PAM is also the most commonly applied polymer in enhanced oil recovery applications; the use of surfactant-polymer flooding can increase oil recovery by 5–30% 14 and in some ...

    • investigation of the degradation and stability of acrylamide

      Investigation of the degradation and stability of acrylamide

      Zhang et al. , synthesized the polymer thickening agent DXGY-1, which is a cationic polyacrylamide. Its viscosity retention ratio in 12% HCl + 3% HF reached 82%. Liu et al. , synthesized a copolymer from AM, DMDAAC, and AMPS monomers and a cationic monomer X. As an acid thickening agent, the viscosity retention ratio of the copolymer in 20 wt% HCl reached 90%.

    • polyacrylamide market for water treatment, oil & gas, paper

      Polyacrylamide Market for Water Treatment, Oil & Gas, Paper

      ALBANY, New York, February 29, 2016 /PRNewswire/ -- According to the research report, the global polyacrylamide market was valued at US$4.09 billion in 2014... Resources Blog

    • oil & gas | snf group

      Oil & Gas | SNF Group

      Polymer flooding can yield a significant increase in oil recovery compared to conventional waterflooding. Polymer is mixed and injected continuously for an extended period of time until about 30 to 50 percents of the reservoir pore volume in the project area have been injected.

    • water soluble anionic polyacrylamide emulsion for friction

      Water Soluble Anionic Polyacrylamide Emulsion for Friction

      Bluwat Anionic Polyacrylamide Emulsion is high molecular weight with different charge density, mainly used as flocculants in water treatment, mining, paper making, sludge dewatering, oily wastewater treatment, and drilling etc.. In oil drilling field, it is used as Friction Reducer, good viscosity, high efficiency.

    • anionic polyelectrolyte na lco - buy nalco polyacrylamide

      Anionic Polyelectrolyte Na Lco - Buy Nalco Polyacrylamide

      It is most often used to increase the viscosity of water (creating a thicker solution) or to encourage flocculation of particles present in water. Due to the polar groups on the molecular chain containing a certain amount, it can through the adsorption of solid particles suspended in water, bridging between particles or through the charge and make the particle formation of large flocs condensation.

    • viscosity behavior of alkaline, surfactant, polyacrylamide

      Viscosity Behavior of Alkaline, Surfactant, Polyacrylamide

      Viscosity Behavior of Alkaline, Surfactant, Polyacrylamide Solutions Used for Enhanced Oil Recovery. The addition of anionic surfactants at low concentrations slightly decreased alkali/polymer solutions viscosity. However, a significant viscosity enhancement for alkali/polymer solutions was observed at higher surfactant concentrations and over a narrow range of alkali concentrations.

    • china anionic polyacrylamide, china anionic ... - alibaba

      China Anionic Polyacrylamide, China Anionic ... - alibaba

      You can also choose from free samples, paid samples. There are 8,456 anionic polyacrylamide suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 100% of anionic polyacrylamide respectively. Anionic polyacrylamide products are most popular in Mid East, Southeast Asia, and Africa.

    • temperature tolerant and salt resistant polyacrylamide

      Temperature Tolerant and Salt Resistant Polyacrylamide

      In oil field exploration and development and exploration of geology, water and coal, it is used as adhesive of well drilling mud raw materials, can improve the service life of drill bits, improve the drill speed and drilling footage, and reduce plug in replacing drill, and has prominent well slough preventing effect, and it can be used as fracturing fluid of oil fields or plugging agent of controlling profile and plugging water.

    • polyacrylamide - wikipedia

      Polyacrylamide - Wikipedia

      In oil and gas industry Polyacrylamide derivatives especially co-polymers of that have a substantial effect on unconventional production and hydraulic fracturing. As an nonionic monomer it can be co-polymerize with anionic for example Acrylic acid and cationic monomer such as diallyldimethyl ammonium chloride (DADMAC) and resulted co-polymer that can have different compatibility in different applications.

    • global polyacrylamide market size & share | industry report

      Global Polyacrylamide Market Size & Share | Industry Report

      Anionic and cationic polyacrylamide polymers emerged as the dominant product segments in the market and accounted for over 75% of the overall demand in 2018. These anionic polyacrylamide polymers are used in applications including wastewater treatment, pulp and paper, aquaculture , coal mining, food and beverage, and oil and gas industries.

    • polyacrylamide market for water treatment, oil & gas, paper

      Polyacrylamide Market for Water Treatment, Oil & Gas, Paper

      Recent expansion in the mining sector is expected to propel the demand for polyacrylamide. Anionic polyacrylamide was the major product type, accounting for over 45% share of the global ...

    • polyacrylamide market for water treatment, oil & gas, paper

      Polyacrylamide Market for Water Treatment, Oil & Gas, Paper

      Anionic polyacrylamide is anticipated to continue its dominance in the polyacrylamide market during the forecast period due to its rising demand in a wide range of applications. Water treatment was the major application, accounting for more than 50% volume share of the global polyacrylamide market in 2014. Increase in awareness about industrial and municipal wastewater treatment is estimated to propel the demand for polyacrylamide during the forecast period.

    • petroleum geology petroleum systems eor 101

      Petroleum Geology Petroleum Systems EOR 101

      Fine-tuning chemistry can help to limit shear and salt sensitivities of synthetic polymers. SNF develops and manufactures tailor-made polymers based on acrylamide. High molecular weight hydrosoluble polymers are mainly used to increase viscosity. Polymer / Solvent Interaction Important notions to understand properties of polymers into solution.

    • waste water treatment chemical flocculant anionic cationic

      waste water treatment chemical flocculant anionic cationic

      Polyacrylamide in waste water treatment sludge dewatering processing Main Production: 1. Oilfield Chemicals, Oilfield chemical is a general germ,The oilfield chemicals we can supply include anionic polyacrylamide used for oil drilling mud additives , drag reduction

    • transportation of heavy oils using polymer-stabilized oil-in

      Transportation of heavy oils using polymer-stabilized oil-in

      ent oil fractions, temperatures, shear rates and salt content. Two chemicals were used to stabilize the emulsions, namely a nonionic surfactant and an anionic, high molec-ular weight polymer. It was found that viscosity reduction higher than 90% can be obtained through the creation of oil-in-water emulsions with oil content of less than 70%.

    • performance evaluation of starpam polymer and application

      Performance Evaluation of STARPAM Polymer and Application

      When reaching the same viscosity, the content of STARPAM polymer is lower, which can reduce the cost of oil production. The STARPAM contains more than 7 long chain arms, with large viscosity and molecular weight of that is more than 25 million, which can increase the volume of the hydrodynamics of the molecular chain.

    • phpa powder particalyy hydrolyzed polyacrylamide msds

      PHPA Powder Particalyy Hydrolyzed Polyacrylamide MSDS

      In oil field exploration and development and exploration of geology, water and coal, it is used as adhesive of well drilling mud raw materials, can improve the service life of drill bits, improve the drill speed and drilling footage, and reduce plug in replacing drill, and has prominent well slough preventing effect, and it can be used as fracturing fluid of oil fields or plugging agent of controlling profile and plugging water.

    • sulfonated polyacrylamide adsorption onto carbonate reservoir

      Sulfonated polyacrylamide adsorption onto carbonate reservoir

      The salinity is not less than 1.2×105 mg•L-1, AN12-4-12 can decrease the oil-water interfacial tension to 2.2×10-3 mN•m-1, while AN8-4-8 only makes that reduce to 9.7×10-3 mN•m-1.

    • evaluation of solution and rheological properties for

      Evaluation of solution and rheological properties for

      For HAPAM polymer, the viscosity gradually increases with increase in temperature, reaches a maximum at approximately 50 °C, and then decreases as the temperature continues to increase. This can be attributed to enhancement of intermolecular hydrophobic association with increase of temperature, at least to an extent because hydrophobic association is an endothermic process accompanied by an entropy increase .

    • transportation of heavy oils using polymer-stabilized oil-in

      Transportation of heavy oils using polymer-stabilized oil-in

      ent oil fractions, temperatures, shear rates and salt content. Two chemicals were used to stabilize the emulsions, namely a nonionic surfactant and an anionic, high molec-ular weight polymer. It was found that viscosity reduction higher than 90% can be obtained through the creation of oil-in-water emulsions with oil content of less than 70%.

    • performance evaluation of starpam polymer and application

      Performance Evaluation of STARPAM Polymer and Application

      When reaching the same viscosity, the content of STARPAM polymer is lower, which can reduce the cost of oil production. The STARPAM contains more than 7 long chain arms, with large viscosity and molecular weight of that is more than 25 million, which can increase the volume of the hydrodynamics of the molecular chain.

    • can associative polymers reduce the residual oil ... - onepetro

      Can Associative Polymers Reduce the Residual Oil ... - OnePetro

      While anionic polyacrylamide (APAM) shows very similar resistance factors (RF) in coreflood experiments with and without oil, a significantly reduced RF in the presence of oil has been found for the associative polymers. The magnitude of this decrease in resistance factor was dependent on the specific type of associative polymer.

    • novel associative acrylamide-based polymers for proppant

      Novel Associative Acrylamide-based Polymers for Proppant

      Novel Associative Acrylamide-based Polymers for Proppant Transport in Hydraulic Fracturing Fluids. The impact of oxidizing breakers and surfactants added to increase or decrease the viscosity of solutions are reported as well. The new polymers can be used in slickwater, linear gel and cross-linked hydraulic fracturing fluid.

    • what's driving the polyacrylamide market growth? prominent

      What's driving the Polyacrylamide Market Growth? Prominent

      Polyacrylamide is made up of acrylamide monomer and is water-soluble. It increases the viscosity of water and facilitates the flocculation of particles present in water.

    • mining flocculant polyelectrolyte polyacrylamide equivalent

      Mining Flocculant Polyelectrolyte Polyacrylamide Equivalent

      Blufloc AA5416 Anionic polyacrylamide should be properly dipersed and dissolved to 0.1-0.5% concentration. Dissolution should be completed around 1 hour of agitation, but will be faster in warm water.

    • infl uence of surfactants used in surfactant-polymer fl ooding

      Infl uence of surfactants used in surfactant-polymer fl ooding

      polyacrylamide (HPAM) as the polymer. The dissolved HPAM can increase the viscosity of flooding fluid, decrease the mobility ratio of water to oil, and enhance the conformance efficiency. The surfactants can reduce the interfacial tension of water and oil and improve the cleaning efficiency. Therefore, SP flooding can enhance oil recovery greatly.

    • synthesis of high molecular weight partially hydrolyzed

      Synthesis of high molecular weight partially hydrolyzed

      The sedimentation rate of magnesium hydroxide was also found to increase with increasing anionic polyacrylamide (PAM 1200) concentration until it reaches a maximum at 3 ppm and then began to ...

    • a new empirical model for viscosity of sulfonated

      A New Empirical Model for Viscosity of Sulfonated

      The accuracy of the viscosity model of sulfonated polyacrylamide polymer can be improved by increasing the number of levels for each factor. Since this idea may increase the number of required experimental runs, factors with small effects such as temperature levels and aging time can be removed from the design for a temperature range of up to 80 °C.

    • soap - wikipedia

      Soap - Wikipedia

      Greases are usually emulsions of calcium soap or lithium soap and mineral oil. Many other metallic soaps are also useful, including those of aluminium, sodium, and mixtures thereof. Such soaps are also used as thickeners to increase the viscosity of oils.